PC Freigabe von Laufwerk C

  • hallo Zusammen,

    ich habe das Problem das ich die Festplatte C im PC nicht Sichern kann.

    Wenn ich alles einstelle, kommt die Fehlermeldung, keine Berechtigung. Wo man das Häkchen für Laufwerk C setzen kann, ist es auch leicht ausgegraut. :evil:

    Was muss man am PC Einstellen, damit Ugreen 2800 die Berechtigung bekommt das Laufwerk zu sichern :?:

    Grüße Ulrich DL3ED

  • Systempartitionen können meines Wissens nicht gesichert werden

    Zudem es gut wäre mit was / App und Funktion Du sichern willst uns mitzuteilen.

    Meine Hardware

    iDX6011Pro 64GB RAM, 3x12 TB SG Enterpr., 2x2TB NVME Lexar NM790 Raid1,

    DXP4800+, 64GB RAM Kingst, 2x8TB WDRedPl. NVME 2x512GB Samsg 970EvoPlus

    DXP2800 1x12TB WDRedPl, 16GB RAM Crucial, NVME 2x256GB Samsg.Raid1,

    DS1525+, 2x8TB WD, 1x12TB SG IronWolf, 1x3TB WDRedPlus, 2x2TB NVME Lexar NM790 Raid1, 40GB ECC RAM

    DS720+ 2x3TB WDRedPl, 2x250GB NVME Samsg. 16GB RAM Crucial,

    DS218+ 1x12TB WD, 1x500GB SSD, RAM 10GB

    USV US3000, EatonEllip.PRO 850DIN, Zyxel XMG-108 8 x 2,5GB, Zyxel GS1200-8 x 1GB,

  • Wo man das Häkchen für Laufwerk C setzen kann, ist es auch leicht ausgegraut.

    Dann steht es offenbar nicht zur Verfügung.

    Wenn du dein Windowssystem sichern willst, benutze eine SW, die das kann.

    Meine Hardware


    • DXP6800PRO | 2 x CT16G48C40S5.M8A1 16 GB 4800 MHz | 3 x Seagate ST12000VN0008-2YS101 12TB | 3 x Samsung SSD 870 EVO 1TB | 4 x Samsung SSD 990 PRO 2TB

  • moin,

    gibt es irgendwo die Möglichkeit nachzusehen welcher Path den Fehler verursacht. Das würde schon helfen.

    Grüße

  • Es sind die Systemverzeichnise, die das verhindern.

    Solche Verzeichnise zu sichern funktioniert nur mit Backup Software, welche BareMetal Backups macht.

    Meine Hardware

    iDX6011Pro 64GB RAM, 3x12 TB SG Enterpr., 2x2TB NVME Lexar NM790 Raid1,

    DXP4800+, 64GB RAM Kingst, 2x8TB WDRedPl. NVME 2x512GB Samsg 970EvoPlus

    DXP2800 1x12TB WDRedPl, 16GB RAM Crucial, NVME 2x256GB Samsg.Raid1,

    DS1525+, 2x8TB WD, 1x12TB SG IronWolf, 1x3TB WDRedPlus, 2x2TB NVME Lexar NM790 Raid1, 40GB ECC RAM

    DS720+ 2x3TB WDRedPl, 2x250GB NVME Samsg. 16GB RAM Crucial,

    DS218+ 1x12TB WD, 1x500GB SSD, RAM 10GB

    USV US3000, EatonEllip.PRO 850DIN, Zyxel XMG-108 8 x 2,5GB, Zyxel GS1200-8 x 1GB,

  • Ich hab zu meinen Windows Zeiten die C Partition mit Macrium Reflect auf Externe HDD gesichert.

    Man konnte Vollbackup und inkrementell einstellen. Auf einem NAS zu sichern hab ich nie probiert.

    Da müsste ja auf dem NAS eine gleich große NTFS Partition als Ziellaufwerk erstellt werden. Ob das möglich ist?

    Andere Backup-Software kann das vielleicht, da hilft Gockel weiter.

  • Mit Veeam wäre so etwas machbar, da gibt es auf der Homepage eine kostenlose Free Version.

    Meine Hardware

    iDX6011Pro 64GB RAM, 3x12 TB SG Enterpr., 2x2TB NVME Lexar NM790 Raid1,

    DXP4800+, 64GB RAM Kingst, 2x8TB WDRedPl. NVME 2x512GB Samsg 970EvoPlus

    DXP2800 1x12TB WDRedPl, 16GB RAM Crucial, NVME 2x256GB Samsg.Raid1,

    DS1525+, 2x8TB WD, 1x12TB SG IronWolf, 1x3TB WDRedPlus, 2x2TB NVME Lexar NM790 Raid1, 40GB ECC RAM

    DS720+ 2x3TB WDRedPl, 2x250GB NVME Samsg. 16GB RAM Crucial,

    DS218+ 1x12TB WD, 1x500GB SSD, RAM 10GB

    USV US3000, EatonEllip.PRO 850DIN, Zyxel XMG-108 8 x 2,5GB, Zyxel GS1200-8 x 1GB,

  • Ein NTFS Laufwerk auf Ugreen OS zu erstellen geht nicht. Bei der Erstellung eines Laufwerks werden aktuell nur ext4 und BTRFS angeboten.

    NAS: mehrere DXP-4800+ mit Raid 5, 4 Toshiba 22 TB (Btrfs) und Raid 1, 2 Samsung 990 Pro 4 TB (Btrfs), 64 GB RAM

    Clients/Server: Linux Mint 22.3, MX-Linux, Debian Trixie.

  • Ein NTFS Laufwerk auf Ugreen OS zu erstellen geht nicht.

    Dem TE geht hier eigentlich um ein Backup auf das NAS, und da spielt es nach meinen Erkenntnissen keine Rolle auf welches Dateisystem gebackupt wird, solange die ClientSoftware kann.

    Meine Hardware

    iDX6011Pro 64GB RAM, 3x12 TB SG Enterpr., 2x2TB NVME Lexar NM790 Raid1,

    DXP4800+, 64GB RAM Kingst, 2x8TB WDRedPl. NVME 2x512GB Samsg 970EvoPlus

    DXP2800 1x12TB WDRedPl, 16GB RAM Crucial, NVME 2x256GB Samsg.Raid1,

    DS1525+, 2x8TB WD, 1x12TB SG IronWolf, 1x3TB WDRedPlus, 2x2TB NVME Lexar NM790 Raid1, 40GB ECC RAM

    DS720+ 2x3TB WDRedPl, 2x250GB NVME Samsg. 16GB RAM Crucial,

    DS218+ 1x12TB WD, 1x500GB SSD, RAM 10GB

    USV US3000, EatonEllip.PRO 850DIN, Zyxel XMG-108 8 x 2,5GB, Zyxel GS1200-8 x 1GB,

  • Den SAN-Manager gibt es nicht umsonst ;)

    Ups, den hab ich mir noch nicht angeschaut. Und nicht daran gedacht.

    Okay, dann muss ich meine Aussage zurückziehen.

    NAS: mehrere DXP-4800+ mit Raid 5, 4 Toshiba 22 TB (Btrfs) und Raid 1, 2 Samsung 990 Pro 4 TB (Btrfs), 64 GB RAM

    Clients/Server: Linux Mint 22.3, MX-Linux, Debian Trixie.

  • Es gibt schon schlaue Köpfe gegenüber anderen hier 🙄

    Meine Hardware

    iDX6011Pro 64GB RAM, 3x12 TB SG Enterpr., 2x2TB NVME Lexar NM790 Raid1,

    DXP4800+, 64GB RAM Kingst, 2x8TB WDRedPl. NVME 2x512GB Samsg 970EvoPlus

    DXP2800 1x12TB WDRedPl, 16GB RAM Crucial, NVME 2x256GB Samsg.Raid1,

    DS1525+, 2x8TB WD, 1x12TB SG IronWolf, 1x3TB WDRedPlus, 2x2TB NVME Lexar NM790 Raid1, 40GB ECC RAM

    DS720+ 2x3TB WDRedPl, 2x250GB NVME Samsg. 16GB RAM Crucial,

    DS218+ 1x12TB WD, 1x500GB SSD, RAM 10GB

    USV US3000, EatonEllip.PRO 850DIN, Zyxel XMG-108 8 x 2,5GB, Zyxel GS1200-8 x 1GB,

  • Ich hab zu meinen Windows Zeiten die C Partition mit Macrium Reflect auf Externe HDD gesichert.

    Man konnte Vollbackup und inkrementell einstellen. Auf einem NAS zu sichern hab ich nie probiert.

    Da müsste ja auf dem NAS eine gleich große NTFS Partition als Ziellaufwerk erstellt werden. Ob das möglich ist?

    Andere Backup-Software kann das vielleicht, da hilft Gockel weiter.

    Für was eine NTFS-Partition? ;)

Participate now!

Join our community with over 10,000 members!

Register yourself now for free to get full access to all content, graphics, downloads and other exclusive features!