VLAN tagging and per-VM VLAN assignment

UYELLOW · November 14, 2025 at 3:52 PM

Mir fehlt die Funktion VMs an dedizierte VLANs durchzureichen. Ich glaube und hoffe, dass es noch viele andere gibt welche sich danach sehnen.

Anbei die Antwort auf meine Frage von UGREEN

Quote

Hi ***,
Currently, UGOS supports Network Bridging (Normal and Virtual Bridging), allowing VMs to connect directly to the NAS’s physical interface.
However, VLAN tagging and per-VM VLAN assignment are not yet available.
We’ve checked the official System Update Plan (updated on September 30, 2025):
VLAN configuration is not yet listed among the upcoming 12-month feature updates.
You can review the roadmap here: https://nas-eu.ugreen.com/pages/system-update
We’ll continue to forward user feedback like yours to the product team, as VLAN support is indeed a valuable feature for virtualization users.

Display More

Gammablitz · December 10, 2025 at 8:54 PM

Hallo,

habe mir die Ugreen DXP2800 gekauft, genau mit diesem Gedanken meine VM´s im VLAN laufen zu lassen, habe jetzt 2 Std. rumprobiert bis ich auf deinen Post hier gestoßen bin und bin echt enttäuscht/erschüttert das UGREEN dieses Feature noch nicht anbietet.

Wo muss ich mich hinwenden um auch mal ein Supportcase zu eröffnen.

Lg Gammablitz

mispol · May 2, 2026 at 11:59 AM

I configured trunk port on switch with native(untagged) vlan 1, other vlans tagged.
nas used vlan1, vm vlan 23

#modprobe 8021q

# ifconfig
br23: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::e0ac:24ff:feef:268b prefixlen 64 scopeid 0x20<link>
ether e2:ac:24:ef:26:8b txqueuelen 1000 (Ethernet)

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.11.32 netmask 255.255.255.0 broadcast 0.0.0.0
ether 6c:1f:f7:92:ae:21 txqueuelen 1000 (Ethernet)

eth0.23: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::6e1f:f7ff:fe92:ae21 prefixlen 64 scopeid 0x20<link>
ether 6c:1f:f7:92:ae:21 txqueuelen 1000 (Ethernet)

vnet1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::fc54:ff:feb7:8ed5 prefixlen 64 scopeid 0x20<link>
ether fe:54:00:b7:8e:d5 txqueuelen 1000 (Ethernet)

# ip link
8: eth0.23@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br23 state UP mode DEFAULT group default qlen 1000
link/ether 6c:1f:f7:92:ae:21 brd ff:ff:ff:ff:ff:ff
9: br23: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether e2:ac:24:ef:26:8b brd ff:ff:ff:ff:ff:ff
11: vnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br23 state UNKNOWN mode DEFAULT group default qlen 1000
link/ether fe:54:00:b7:8e:d5 brd ff:ff:ff:ff:ff:ff

vm network config (virsh):

UYELLOW · May 19, 2026 at 2:28 PM

Sounds fair (even if I dont understand what you are doing )

Still hope that there once will be a OOTB solution from UGreen (yes Santa Clause exists)

VLAN tagging and per-VM VLAN assignment

Participate now!

Tags