LED Anzeige Pink

  • Hallo,
    ich habe die DXP2800. Sie läuft auch super. Es sind zwei 8TB WD Red Pro verbaut. Seit ca. einer Woche zeigt die LED Anzeige an der Disk 1 die Farbe Pink/Rosa(siehe Bild). Ich finde leider diesen Zustand in der BA nicht, nur weiß oder orange. Sie reagiert so wie auch die der Disk 2(leuchtet oder Blinkt mal). Kann es sein das nur die LED defekt ist. Updates sind aktuell. Der Systemtest der Platten zeigt auch alles Normal.
    Hat einer von euch auch den Effekt oder eine erklärung.

    Danke für eine Erleuchtung!😝

  • Ich würde "Pink" ja eher als "Rot" bezeichnen*murmel*:/

    Ugreen Nas DXP-2800 mit

    1xWD 4TB

    1xToshiba 10TB

    1x Kodak SSD 512GB / 1xNoName SSD 512GB

    "1xSeagate 4,5TB/usb3.0." $$$ "1x San Disk SSD Plus 240 GB/usb-c "$$$"1xUsb-Stick San-Disk-Cruzer-Force 30GB/usb2.0."

  • Rosa ist schon mal bei der DXP offiziell nicht vorgesehen. Solange sie die Funktionen der eigentlichen orangenen ordentlich anzeigt, wäre mir das erstmal egal.

    Seit dem letzten Update, erst die vergangenen Tage, Leuchtet sie bei mir überhaupt nicht mehr, was mich schon eher stört, wenn man den Systemzustand nicht einschätzen kann.

    Zur Sicherheit kannst Du ja mal bei UGREEn ein Ticket beim Support eröffnen und das ganze diesem mal schildern. Mal sehen was der dann dazu sagt.

    Meine Hardware

    iDX6011 Pro (64GB RAM) btrfs, 2x12 TB SG Enterpr. Raid1, 1x12TB SG Enterpr. Basic, 2x 2TB NVME Lexar NM790 Raid1,

    DXP2800 btrfs 1x 12TB WDRedPl, 16GB RAM Crucial CT16G56C46S5.C8B2, NVME 2x 500GB Samsg. 970 EVOPlus Raid1,

    DS1525+, btrfs 2x8TB WD, btrfs SHR, 1x 12 TB SG IronWolf, 1x 3TB WD RedPlus, 2x 2TB NVME Lexar NM790 Raid1, 40GB ECC RAM

    DS218+ btrfs 1x12TB WD, 1x SSD 500GB, RAM 20GB DDR4-2666MHZ

    USV US3000, EatonEllip.PRO 850DIN, Zyxel XMG-108 8 x 2,5GB, Zyxel GS1200-8 x 1GB,

  • Hey, okay danke. Ich denke die LED ist kaputt, den ich hab gerade die Identifikationsfunktion probiert wo sie die zu identifizierende Festplatte dann mit grüner LED anzeigt und da ist sie aus. Die andere zeigt normal Grün.

    Hm auch irgendwie doof.

  • Ok, auch dumm wegen so etwas das ganze auf Garantie abwickeln zu müssen. Aber viel mehr wird da nicht übrig bleiben. ☹️

    Meine Hardware

    iDX6011 Pro (64GB RAM) btrfs, 2x12 TB SG Enterpr. Raid1, 1x12TB SG Enterpr. Basic, 2x 2TB NVME Lexar NM790 Raid1,

    DXP2800 btrfs 1x 12TB WDRedPl, 16GB RAM Crucial CT16G56C46S5.C8B2, NVME 2x 500GB Samsg. 970 EVOPlus Raid1,

    DS1525+, btrfs 2x8TB WD, btrfs SHR, 1x 12 TB SG IronWolf, 1x 3TB WD RedPlus, 2x 2TB NVME Lexar NM790 Raid1, 40GB ECC RAM

    DS218+ btrfs 1x12TB WD, 1x SSD 500GB, RAM 20GB DDR4-2666MHZ

    USV US3000, EatonEllip.PRO 850DIN, Zyxel XMG-108 8 x 2,5GB, Zyxel GS1200-8 x 1GB,

  • Ich würde die LED einfach mit Missachtung strafen, oder wie es ein Freund von mir damals mal gemacht hat, mit einem 1mm Bohrer ein Loch in die LED gebohrt, damit sie ausgeht. Gut, es handelte sich dabei um die Öldruckkontrollleuchte im Cockpit eines Golf 2, aber gut! Sie hat halt genervt :D

    Ich bin mir jedenfalls nicht sicher, ob ich wegen einer defekten LED das Gerät einschicken würde.

    FRITZ!Box 5590 Fiber | UniFi Express 7 | 2,5-GBit-LAN & Wi-Fi 7
    DXP4800 Pro - 2x 1TB Crucial P310 NVMe RAID1 - 2x 2TB Crucial MX500 SSD RAID1 - 2x 16GB Crucial CT16G56C46S5 (5600Mhz)
    DS224+ 3TB WD Red HDD RAID1 18GB Ram | DS124 1TB Samsung 870 EVO SSD
    Linux Mint | Ubuntu-Server | Windows | iOS | iPadOS
    UGREEN.FORUM/Filebase | Synology-forum/Add-ons | GitHub.com/toafez

  • ...andere würden eine NVME und SSD zurückschicken, wenn sie von Curical wären. 8o:D

    UGREEN DXP2800 | UGOS 1.17.0.0095 - 16GB RAM - 2x Lexar NM790 1TB Btrfs RAID1 - 2x Seagate IronWolf 4TB Btrfs RAID1
    Raspberry Pi 4B/4 | DietPi 10.5.2 (Debian Trixie) - 1x WD Red SA500
     MacBook Air M4 | macOS 26.5.2 |  mobile devices only | FRITZ!Box 7690 (OS 8.25) | Eaton Ellipse ECO 650 DIN USB USV

  • Kann mir nicht passieren, habe von Anfang an noch nie Crucial Artikel gekauft 😅

    Nach allem was ich da schon immer gelesen habe, konnte ich mich noch nie dafür begeistern 🤷

    Meine Hardware

    iDX6011 Pro (64GB RAM) btrfs, 2x12 TB SG Enterpr. Raid1, 1x12TB SG Enterpr. Basic, 2x 2TB NVME Lexar NM790 Raid1,

    DXP2800 btrfs 1x 12TB WDRedPl, 16GB RAM Crucial CT16G56C46S5.C8B2, NVME 2x 500GB Samsg. 970 EVOPlus Raid1,

    DS1525+, btrfs 2x8TB WD, btrfs SHR, 1x 12 TB SG IronWolf, 1x 3TB WD RedPlus, 2x 2TB NVME Lexar NM790 Raid1, 40GB ECC RAM

    DS218+ btrfs 1x12TB WD, 1x SSD 500GB, RAM 20GB DDR4-2666MHZ

    USV US3000, EatonEllip.PRO 850DIN, Zyxel XMG-108 8 x 2,5GB, Zyxel GS1200-8 x 1GB,

  • *Räusper* Meine DXP2800 besteht förmlich nur aus Curical. Jetzt macht mir keine Angst =O

    FRITZ!Box 5590 Fiber | UniFi Express 7 | 2,5-GBit-LAN & Wi-Fi 7
    DXP4800 Pro - 2x 1TB Crucial P310 NVMe RAID1 - 2x 2TB Crucial MX500 SSD RAID1 - 2x 16GB Crucial CT16G56C46S5 (5600Mhz)
    DS224+ 3TB WD Red HDD RAID1 18GB Ram | DS124 1TB Samsung 870 EVO SSD
    Linux Mint | Ubuntu-Server | Windows | iOS | iPadOS
    UGREEN.FORUM/Filebase | Synology-forum/Add-ons | GitHub.com/toafez

  • So lange sie nicht von Crucial sind... 8o

    This image is exclusive to our members!
    Please log in or register for free to view graphics and attachments.

    UGREEN DXP2800 | UGOS 1.17.0.0095 - 16GB RAM - 2x Lexar NM790 1TB Btrfs RAID1 - 2x Seagate IronWolf 4TB Btrfs RAID1
    Raspberry Pi 4B/4 | DietPi 10.5.2 (Debian Trixie) - 1x WD Red SA500
     MacBook Air M4 | macOS 26.5.2 |  mobile devices only | FRITZ!Box 7690 (OS 8.25) | Eaton Ellipse ECO 650 DIN USB USV

  • Dödöm! :rolleyes: Hab's geändert. Aber Hauptsache, ihr habt Spaß ;)

    FRITZ!Box 5590 Fiber | UniFi Express 7 | 2,5-GBit-LAN & Wi-Fi 7
    DXP4800 Pro - 2x 1TB Crucial P310 NVMe RAID1 - 2x 2TB Crucial MX500 SSD RAID1 - 2x 16GB Crucial CT16G56C46S5 (5600Mhz)
    DS224+ 3TB WD Red HDD RAID1 18GB Ram | DS124 1TB Samsung 870 EVO SSD
    Linux Mint | Ubuntu-Server | Windows | iOS | iPadOS
    UGREEN.FORUM/Filebase | Synology-forum/Add-ons | GitHub.com/toafez

Participate now!

Join our community with over 10,000 members!

Register yourself now for free to get full access to all content, graphics, downloads and other exclusive features!